Alucaps      
ALUCAPS - PLASTIC DIVISION
PLASTIC DIVISION |

28 mm and 27 mm SCREWCAPS


Compression Department | Beverages & CSD Industry

DESCRIPTION & PERFORMANCE

  • These caps are used on PET and glass bottles for beverages. They have a guarantee band of proprietary design with very robust internal fins that ensure a high inviolability. The thread is interrupted to allow the escape of carbonated gas during the opening. These caps are molded in a wide variety of colors and designs, and can be printed on the top panel with up to 4 colors. In addition, for promotions, designs with one color or alphanumeric characters chains can be printed on the inside.

MATERIALS

  • Some of the models come in two pieces, in which case the shell is made from polypropylene and the liner is made from a PVC-free EVA compound which is molded within the shell. Other models are one-piece and do not have an independent liner but the seal is in the shell itself, the material in this case being polypropylene or PAD.

HIGH CAPS

CODE: M28TRE

M28TRECaps for PET nonreturnable bottles, PCO finish or glass finish 1655. They have a fully tearable 360° guarantee band. Designed with a liner for carbonated beverages with a tightness seal that withstands up to 10 bars.

 

CODE: M28TMA

M28TMA Caps for PET nonreturnable bottles, PCO finish. They have a fully tearable 360° guarantee band. Designed in one piece, without a liner, for flat water, with or without addition of nitrogen, with a tightness seal withstanding up to 3 bars.

 

CODE: M28TRR

M28TRR Caps for REF-PET returnable bottles, BPF finish. They have a partially tearable 240° guarantee band. Designed with a liner for carbonated beverages with a tightness seal that withstands up to 10 bars.

 

 

CODE: M28TDR

M28TDRCaps for PET returnable bottle BPF finish. Has removable band partial guarantee to 240 °. It has a double liner design for carbonated beverages which allows better containment of carbonation abused finish with tight seal up to 10 bars.

SHORT CAPS

CODE: M27SRL

M27SRLLiner caps for carbonated beverages with 0.5gr reduction in weight. Work on the finish 27 of PET, which allows a remarkable saving of up to 2 g. on the weight of finish. 2 inputs are threaded for easy-open. Design guarantee band that breaks the bridges immediately to unscrew to give the anti-tamper feature.

 

CODE: M28SRL

M28SRLLiner caps for carbonated beverages with 0.4gr reduction in weight. 1873 work on the finish of PET, allowing savings of 1.5gr on the weight of finish. Design guarantee band that breaks the bridges immediately to unscrew to give the anti-tamper feature.

 

CODE: M28SME

M28SMEOne piece caps for non-carbonated water with 0.6gr reduction in weight 1873. Work on the finish of PET, allowing savings of 1.5gr. on the weight of finish. Sealing lip design with olive profile, not straight, and manufacture high-density polyethylene for optimum sealing even when nitrogen addition.

 

CODE: M28RRL

M28RRLLiner caps for carbonated beverages with 0.4 g. reduction in weight. Work on 1881 PET finish, allowing a saving of 1.5 g. on the weight of finish, design guarantee band that breaks the bridges immediately to unscrew to give the anti-tamper feature.

 

CODE: M28RME

M28RMEOne piece plugs for non-carbonated water with 1.2 g. reduction in weight. They work on the neck 1881 of PET, allowing savings of 1.5gr. on the weight of finish. Sealing lip design with olive profile, not straight, and manufacture high-density polyethylene for optimum sealing even when nitrogen addition.

CONTACT US ALUCAPS MEXICANA GROUP S.A. DE C.V.

Av. Eje Norte Sur No.15 Civac
Jiutepec, Morelos
Tel: (777) 329 26 30
alucapsmexicana@alucaps.com.mx

Powered by ROC
EXPRESS CONTACT
Privacy Agreement